2012 JSRAE Annual Conference Technical Program




DAY1　September 12, 2012, Wednesday


ROOM A


Organized Session OS-5 "Technological Development in Heat Exchangers"

Organizer：ASANO Hitoshi (Kobe Univ.), MIYARA Akio (Saga Univ.), INOUE Norihiro (Tokyo Univ. of Marine

Science and Technology)


A11 9:40〜10:50 OS5-1 ［Chairperson：ASANO Hitoshi (Kobe Univ.) ］


A111 [Keynote Lecture] Some Technical Topics of Ground Heat Exchanger for

　　　　Ground-Coupled Heat Pump System

　　　　*NAGANO Katsunori(Hokkaido Univ.)

A112 Experimental Performance Evaluation of Heat Pump Water Heaters Using CO2 Based Refrigerant Mixture

　　　　SHIKICHI Kazuaki (Kansai Electric Power Co., Inc), *SHIMADA Masanori,

　　　　TAKATA Nobuo (Kyushu Univ.), KOYAMA Shigeru

A113 Simulation of Plate Fin Tube Heat Exchanger Based onTtube Structure

　　　　#OHNO Keisuke (Waseda Univ.), NAKAMURA Hiroo, SAITO Kiyoshi,

　　　　TAKAFUJI Ryoichi (Hitachi Appliances)


A12 11:10〜12:30 OS5-2 ［Chairperson：KAMADA Toshimitsu (DAIKIN Industries)］


A121 Development of Parallel Flow Heat Exchanger for HeatPump Air Conditioner

　　　−Study of improvement in performance of heat exchanger which applied outdoor unit of heat pump

　　　　 with micro channel−

　　　　 *HAYASE Gaku (Samsung Electronics CO., LTD.), CHOI Yonghwa, KIM Youngmin

A122 The Development of Aluminum Cross-Fin-Tube Type Heat Exchanger

　　　　*KAKIYAMA Shiro (Sumitomo Light Metal Industries)

A123 New Heat Exchanger for High Heat Performance by using multi-port copper tube

　　　　*LEE Sang-mu (Mitsubishi Electric Co.), ISHIBASHI Akira, MATSUDA Takuya

A124 A Thermal Performance Model of Tubular Evaporative Condensers of Water Chillers

　　　　*Chien Liang-Han (National Taipei Univ.), Liao Wun-Rong, Hsu Chien-Yeh


Workshop WS2 "Trend and Examples of Technical Development of Heat Exchanger"

Moderators： MIYARA Akio(Saga Univ.), SHIKAZONO Naoki (The Univ. of Tokyo), TSUBOE Hiroaki (Hitachi Appliances)


A13 14:00〜15:10 WS2-1 [Chairperson: TSUBOE Hiroaki (Hitachi Appliances)]


A131 [Keynote Lecture] The Goal of “The Top Eco-City Sapporo” - Sapporo-city efforts measures against global warming -

　　　　MIYASA Naoki (Sapporo city office), *TAKAGI Hiroshi, OOBA Tomohiro, FUJIMOTO Keita

A132 Survey on Technical Subjects of Heat Exchanger for Refrigerating and Air-Conditioning

　　　　- Report of Heat Exchanger Technology Committee -

　　　　*MIYARA Akio (Saga Univ.), KOYAMA Shigeru (Kyushu Univ.)

A133 Activity of the Research Project “Advanced Heat Transfer Technology for Future Refrigerants”

　　　　ASANO Hitoshi (Kobe Univ.)


A14 15:30〜17:10 WS2-2 [Chairperson: MIYARA Akio (Saga Univ.)]


A141 New Heat Exchangers for Automobile Air Conditioner

　　　　SATO Hideaki (DENSO Corp.), KAZARI Kengo, OMAE Shinichi

A142 Energy Saving of Packaged Air Conditioner by Enhancement of Indoor Heat Exchangers

　　　　*YOKOZEKI Atsuhiko (Hitachi Appliances Inc.), TSUBOE Hiroaki, SASAKI Hajime

A143 Development of all aluminum micro-channel heat exchanger for air-conditioner

　　　　*KAMADA Toshimitsu (DAIKIN Industries), KIM Hyunyoung, FUJINO Hirokazu

A144 Development of parallel flow heat exchanger for air conditioner

　　　　*HAYASE Gaku (Samsung Electronics CO., LTD.)

A145 Development of all aluminum parallel flow type heat exchanger

　　　　*MIZUTA Yoshihiko (Sumitomo Light Metal Industries, LTD.), KAKIYAMA Shiro


ROOM B


Organized Session OS8 " Desiccant / Humidity control / Open Cycle Air Conditioning "

Organizers: NAGANOKatsunori(Hokkaido Univ.), HORIBE Akihiko (Okayama Univ.),

KODAMA Akio (Kanazawa Univ.)


B11 9:30〜10:50 OS8-1 ［Chairperson：HORIBE Akihiko (Okayama Univ.)］


B111 Influence of the operating condition on the mass transport resistance in the adsorbent desiccant wheel

　　　　#TSUJIGUCHI Takuya (Gunma Univ.), KODAMA Akio (Kanazawa Univ.), NAKAGAWA Nobuyoshi(Gunma Univ.)

B112 Evaluation on the water vapor adsorption kinetics of isothermal silica gel layer using volumetric method

　　　　#OSAKA Yugo (Kanazawa Univ.), KODAMA Akio

B113 Kinetic Interpretation of Water Vapor Adsorption-Desorption Behavior of a Desiccant Rotor Showing
　　　S-shaped Adsorption Isotherm −Behavior of honeycomb adsorbent in humidity swing−

　　　　*OKAMOTO Kumiko (Mitsubishi Plastics, Inc.), OSHIMA Kazunori (Mitsubishi Chemical Group Science and Technology Research Center,Inc.),
　　　　 KODAMA Akio (Kanazawa Univ), TAKEWAKI Takahiko (Mitsubishi Chemical Group Science and Technology Research Center,Inc.)

B114 Influence of Initial Adsorption Amount on Water-Vapor Desorption Rate using Microwave with Hot Air for Zeolite

　　　　#ITO Seiya (Nagoya Univ.), WATANABE Fujio (Aichi Inst. of Tech.), HUANG Hongyu (Nagoya Univ.),

　　　　HASATANI Masanobu (Aichi Inst. of Tech.), KOBAYASHI Noriyuki (Nagoya Univ.)


B12 11:10〜12:30 OS8-2 [Chairperson：MIYAZAKI Takahiko (Kyushu Univ.) ]


B121 Study of a desiccant air conditioning system driving by solar energy

　　　　JANG Duri (The Univ. of Tokyo), *DANG Chaobin, HIHARA Eiji, GODO Masazumi (Shin nippon air technologies)

B122 Study on Oscillating Phenomena of Desiccant Wheel

　　　　#YAMAGUCHI Seiichi (Waseda Univ.), SAITO Kiyoshi, ITO Suguru(Azbil Corporation), OOMAGARI Yasuhito

B123 Advanced Function of Desiccant Rotors

　　　　*KURODA Masao (Yamato Co. Ltd.), KIMURA Kazuya, KOMORI Masahito

B124 Desiccant wheel staged regeneration and process air purge

　　　　*MARK Goldsworthy (Commonwealth Scientific and Industrial Research Organisation, Energy Technology), STEPHEN White


B13 14:00〜15:40 OS8-3 [Chairperson：YAMAGUCHI Seiichi (Waseda Univ.)]


B131 Development of Desiccant System using Wakkanai Siliceous Shale
　　　　−Part 9: Development of Desiccant Unit Combined with Heat Pump System for Air-Conditioning and Hot Water Supply−

　　　　#FUKUSHIMA Hiroki (Hokkaido Univ.), NABESHIMA Yuki, NAKAMURA Makoto, NAGANO Katsunori,

　　　　TOGAWA Junya (Wakkanai Green Factory), NIKI Kohsuke (Sunpot), FURUKAWA Osamu

B132 Development of Desiccant Air Conditioning System using Wakkanai Siliceous Shale
　　　　−Part 10: Annual Performance Prediction using Numerical Analysis for the Desiccant and Heat Pump Combined System−

　　　　#NABESHIMA Yuki (Hokkaido Univ.), FUKUSHIMA Hiroki, NAKAMURA Makoto, NAGANO Katsunori, TOGAWA Junya (Wakkanai Green Factory),

　　　　 NIKI Kohsuke (Sunpot), FURUKAWA Osamu

B133 Development of Desiccant Air Conditioning System using Wakkanai Siliceous Shale
　　　　−Part 11: Evaluation of Desiccant System Combined with Total Heat Exchanger Unit−

　　　　*TOGAWA Junya (Wakkanai Green Factory), NABESHIMA Yuki (Hokkaido Univ.), FUKUSHIMA Hiroki, NAKAMURA Makoto, NAGANO Katsunori

B134 Proposal for High Efficient Desiccant Air Conditioner using Residential SOFC Cogeneration System

　　　　#PARK Cyanyong (Osaka Univ.), HIRANO Shun, HORI Tsukasa, HISAZUMI Yoshinori,

　　　　 WAKABAYASHI Tsutomu, KISHIMOTO Akira

B135 Investigation of air conditioning system configuration with desiccant wheel for data centre

　　　　#MIHARA Daisuke (Osaka Pref. Univ.), OHKURA Masashi, YOKOYAMA Ryouhei, WAKUI Tetsuya


B14 16:00〜17:40 OS8-4 [Chairperson：NAGANO Katsunori (Hokkaido Univ.)]


B141 Improvement of Gas Engine Driven Heat Pump using Water Spray and Dry Air out of Desiccant

　　　Unit regenerated by Engine Exhaust Heat　−Exergy Analysis of a Total System with Surplus Power of Gas Engine−

　　　　#GOTO Minoru (Osaka Univ.), PARK Cyanyong, IWATSUKI Ysunori, WAKABAYASHI Tsutomu, HORI Tsukasa,

　　　　 HISAZUMI Yoshinori, KISHIMOTO Akira (Osaka Gas)

B142 Effect of Water Temperature on Evaporation of Mist Sprayed from a Nozzle

　　　　*FARNHAM Craig (Osaka City Univ.), NAKAO Masaki, NISHIOKA Masatoshi, NABESHIMA Minako,

　　　　MIZUNO Takeo (H. Ikeuchi & Co., Ltd.)

B143 Research and development of frost-free vapor-compression heat pump systems hybridized with desiccant
　　　　−Part1: Total system overview and key technologies−

　　　　*MATSUOKA Fumio (The Univ. of Tokyo), AYAME Hisao (Shin Nippon Air Technologies), KURODA Naonori,

　　　　GODO Masazumi, IINO Koji (Tokyo Electric Power Company), DANG Chao Bin (The Univ. of Tokyo),

　　　　DAIGUJI Hirofumi, HIHARA Eiji

B144 Research and development of frost-free vapor-compression heat pump systems hybridized with desiccant
　　　　−Part2: Study of drain-free at cooling−

　　　　*KURODA Naonori (Shin Nippon Air Technologies), AYAME Hisao, GODO Masazumi, DANG Chao Bin (The Univ. of Tokyo),

　　　　 DAIGUJI Hirofumi, MATSUOKA Fumio, HIHARA Eiji

B145 Research and development of frost-free vapor-compression heat pump systems hybridized with desiccant
　　　　−Part3: Simulation of frost-free vapor-compression heat pump systems under the frost formation condition−

　　　　*KOYANO Takehiro (The Univ. of Tokyo), HIHARA Eiji, MATSUOKA Fumio, DAIGUJI Hirofumi, DANG Chao-bin,
　　　　 GODO Masazumi (Shin Nippon Air Technologies), KURODA Naoki, AYAME Hisao


ROOM C


Organized Session OS10 "Low Temperature Technology for Food and Biology"

Organizers：WATANABE Gaku (Tokyo Univ. of Marine Science and Technology), KIMIZUKA Norihito (Miyagi Univ)


C11 9:30〜10:50 OS10-1 ［Chairperson：WATANABE Gaku (Tokyo Univ. of Marine Sci. and Tech.)］


C111 The preventive effect of polyols on the oil separation of emulsified surimi during freezing/thawing

　　　　UEKI Yuka (Tokyo Univ. of Marine Sci. and Tech.), OSAKO Kazufumi, *OKAZAKI Emiko

C112 The Effects of Freezing Rate on Frozen Kamaboko Quality

　　　　#KANDA Maki (Tokyo Univ. of Marine Sci. and Tech.), TOKIWA Jun, KOMINAMI Yuri, JIA Ru, SUZUKI Toru, OSAKO Kazufumi, OKAZAKI Emiko

C113 Effect of microwave dehydro freezing for the quality stability of frozen sea urchin gonad

　　　　*KINOSHITA Yasunori (Hokkaido Industrial Tech. Center), YOSHIOKA Takeya, MAKINO Kouji (TAIYO NIPPON SANSO),

　　　　 TAKEUCHI Masahiro

C114 Effect of Microwave Dehydrofreezing on the Quality of Sea Urchin Gonad

　　　　*MAKINO Kouji (TAIYO NIPPON SANSO), TAKEUCHI Masahiro, KINOSHITA Yasunori (Hokkaido Industrial Tech. Center), YOSHIOKA Takeya


C12 11:10〜12:10 OS10-2 ［Chairperson：SUZUKI Toru (Tokyo University of Marin Science and Technology)］


C121 Phase transition of aqueous solutions under high Magnetic field

　　　　*KIMIZUKA Norihito (Miyagi Univ.), TAKAHASHI Kohki (Tohoku Univ.), MOGI Iwao

C122 Cryopreservation of Roe With Use of Liquid-Meniscus

　　　　*TSURUTA Takaharu (Kyushu Inst. of Tech.), KAWANO Masayuki, TAGUCHI Yuko

C123 Three-Dimensional Measurement for Influence of cryprotective agent on freezing preservation of biomechanical materials

　　　　*DO Gabsoo (Nihon Univ.), BAE Yeonghwan (Sunchon National Univ.), IKEHATA Akifumi (National Food Research Inst.),
　　　　 ARAKI Tetsuya (The Univ. of Tokyo)


C13 14:00〜15:40 OS10-3 ［Chairperson：KIMIZUKA Norihito (Miyagi Univ)］


C131 Water permeability of cell membrane in onion tissue during Xe hydrate formation.

　　　　*NORITAKE-ANDO Hiroko (Tokyo Univ. Tech.), KAJIWARA Kazuhito,SUZUKI Toru (Tokyo Univ. Marine Sci. & Technology),
　　　　 OSHITA Seiichi (Tokyo Univ.)

C132 Study of moisture migration mechanism in frozen food through liquid-based coating

　　　　*NORITAKE-ANDO Hiroko (Tokyo Univ. Tech.), KAJIWARA Kazuhito, SUZUKI Toru (Tokyo Univ. Marine Sci. & Technology)

C133 Evaluation of Improved Food Quality by the Freezing after Supercooling

　　　　*WATANABE Manabu (Tokyo Univ. Marine Sci. & Tech.), KANESAKA Naohiro, SUZUKI Toru

C134 Water mobility in the tuna meat that was frozen after super-cooling

　　　　#KOBAYASHI Rika (Tokyo Univ. of Marin Sci. and Tech.), WATANABE Manabu, MATSUKAWA Shingo, SUZUKI Toru

C135 Improvement of food cooling utilizing flow turbulence in propeller fans

　　　　#SUZUKI Sho (Tokyo Univ. of Marine Sci. and Tech.), SUZUKI Toru, WATANABE Manabu


C14 16:00〜17:40 GS1 "Magnetocaloric/Peltier refrigeration」 [Chairperson：OOTAKE Hideo (Hokkaido Inst. of Tech.)]


C141 Study of magnetocaloric-refrigerator system with LaFeCoSi

　　　　*MIYAZAKI Yoshiki (Railway Technical Research Inst.),WAKI Koichiro, ARAI Yuuki, MIZUNO Katsutoshi,
　　　　YOSHIZAWA Kesuke, NAGASHIMA Ken, HIRANO Naoki (Chubu Electric Power Co.),
　　　　TAKADA Hiroaki (Santoku Co.), ITO Koji(Zaouseiki Co.)

C142 Study on in-vehicle magnetic refrigerator −Investigation of heat transport characteristics for new system−

　　　　TASAKI Yutaka(NISSAN MOTOR CO., LTD.),TAKAHASHI Hidekazu,YASUDA Yoshiteru,

　　　　*OKAMURA Tetuji(Tokyo Institute of Technology),MAKINO Masahito,ITO Kouji(Zao seiki)

C143 Test machine of Room-temperature Magnetic Refrigeration Applying Ring Halbach-array Magnetic Circuit

　　　　*WAKI Koichiro(RTRI),MIYAZAKI Yoshiki,ARAI Yuuki,MIZUNO Katsutoshi,NAGASHIMA Ken,
　　　　 ITO Koji(Zao Seiki), KAWANAMI Tsuyoshi(Kobe Univ.)

C144 Study on Development of personal cooling system in the electric vehicle by using a Peltier module

　　　　KATSUTA Masafumi (Waseda Univ.), *ANAMIZU Tomohiro (Waseda Univ.), TOKOROZAWA Keisuke

C145 Discussion on the AMR Configuration for Magnetocaloric Devices

　　　　*KAWANAMI Tsuyoshi (Kobe Univ.), VUARNOZ Didier, TOBA Atsuya (HRO), HIRANO Shigeki


ROOM D


Organized Session OS4 " Present Status and Future Development of Compressors "

Organizers: FUKUTA Mitsuhiro (Shizuoka Univ.), MATSUO Koichi (Mayekawa MFG.)


D11 9:30〜10:30 OS4-1 ［Chairperson：MATSUO Koichi (Mayekawa MFG.)］


D111 Development of Low Friction Thrust Bearing for Reciprocating Compressors in Refrigerator

　　　　#NAGATA Shuhei (Hitachi Ltd.), KOHSOKABE Hirokatsu, SEKIYAMA Nobuya, ONO Toshiaki (Hitachi Appliances, Inc.)

D112 Calculated Optimal Mechanical Efficiency of a Large Capacity Reciprocating Compressor

　　　　TSUJI Takuma (Osaka Electro-Communication Univ.), OKU Tatsuya (Mayekawa MFG.), ISHII Noriaki
　　　　(Osaka Electro-Communication Univ.), ANAMI Keiko (Ashikaga Inst.of Tech.), W. KNISELY Charles (Bucknell Univ.),
　　　　#MAEDA Takashi (Osaka Electro-Communication Univ.), YAMAMOTO Atsushi

D113 Fundamental study on leakage at small clearance with solid contact

　　　　#ADACHI Kensuke (Shizuoka Univ.), FUKUTA Mitsuhiro, YANAGISAWA Tadashi


D12 11:10〜12:30 OS4-2 ［Chairperson：MORIMOTO Takeshi (Panasonic)］


D121 Evaluation of Electrical Properties of Lubricants and Refrigerants with Measurement of Ohm-ammeter
　　　　　and High Pressure Mini-cell −2nd Report: Temperature Dependency−

　　　　#MATSUMOTO Tomoya (Idemitsu Kosan Co.,Ltd), KANEKO Masato

D122 Fundamental study on separation of oil droplet by Coulomb force

　　　　#NAKAYA Eita (Shizuoka Univ.), FUKUTA Mitsuhiro, OGI Yasuhiro

D123 Cancelled

D124 Friction and Wear Characteristics of Surface Modified Vane Materials Lubricated under R404A/POE Mixture

　　　　#TSUKAYAMA Shuichi (Tokyo Inst. of Tech.), TANAKA Shinji


D13 14:00〜15:20 OS4-3 ［Chairperson：FURUSHO Kazuhiro (DAKIN Indsutries)］


D131 Clearance Analysis and Heat Receiving of Scroll Compressors in operation


　　　　#NAKAI Hiroaki (Panasonic), KARINO Tsuyoshi, SAKUDA Atsushi, MORIMOTO Takashi

D132 Development of DC inverter Scroll Compressor used for Marine Container Refrigeration Unit

　　　　*OKAMURA Yuta (Daikin Industries), YOKOYAMA Tomomi, KATO Katsumi, NOJIMA Nobuhiro,
　　　　YOSHIMURA Keiji, KITAURA Hiroshi

D133 High-efficiency Compressor for CO2 Heat Pump Water Heater

　　　　*HODA Tomoki (DENSO CORP.), KATO Hiroyasu, IWANAMI Shigeki, OKI Yasuhiro,HOTTA Tadashi

D134 Elasto-Hydrodynamic Lubrication Effect in Thrust-Slide Bearings of Scroll Compressors

　　　　ISHII Noriaki (Osaka Electro-Communication Univ.), TSUJI Takuma, OKU Tatsuya (Mayekawa MFG.),
　　　　ANAMI Keiko (Ashikaga Inst. of Tech.),W. KNISELY Charles (Bucknell Univ.),
　　　　#NOKIYAMA Kouichi (Osaka Electro-Communication Univ.), SAWAI Kiyoshi (Hiroshima Inst. of Tech.),
　　　　MORIMOTO Takashi (Panasonic Corp.), SAKUDA Atsushi


Organized Session OS7 "Heat and Mass Transport Phenomena with Solid-Liquid Phase Change "

Organizer: MATSUMOTO Koji (Chuo Univ.), KUMANO Hiroyuki (Aoyama Gakuin Univ.)


D14 16:00〜17:40 OS7-1 ［Chairperson：ASAOKA Tatsunori (Aoyama gakuin Univ.)］


D141 Effects of Anisotropy on Ice Crystal Growth on Solid Surface Using Phase Field Model

　　　　#YAMAMOTO Yuji (Shinshu Univ.), KUMANO Hiroyuki (Aoyama Gakuin Univ.)

D142 Numerical Analysis on Melting of Ice by CaCl2 Solution

　　　　*KAMADA Shuusuke (Akita Univ.), TAGO Makoto, KOMATSU Yoshimi, AKATA Hirotake

D143 Flow and Heat Transfer Characteristics of Ice Slurry in Crank-shaped Channels

　　　　TOGASHI Kenichi (Kobe Univ.), HATANO Shuhei, *KAWANAMI Tsuyoshi, FUMOTO Koji (Hirosaki Univ.),
　　　　HIRASAWA Shigeki (Kobe Univ.), SHIRAI Katsuaki

D144 Study on ice slurry generator using low concentration sodium chloride solution

　　　　*SATO Toshiki (Hirosaki Univ.), FUMOTO Koji, KAWANAMI Tsuyoshi (Kobe Univ.), INAMURA Takao (Hirosaki Univ.)

D145 Study of Heat Transfer Characteristics and Freezing Phenomena around Horizontal Tubes Immersed in Water

　　　　*HIROSE Koichi (Iwate Univ.), SASAKI Osamu (Iwate Indus. Tech. Jr. Coll.),

　　　　SUGIYAMA Ryo (Iwate Univ.), SUGAWARA Miho


ROOM E


Organized Session OS2 " Absorption Refrigerator, Heat Pump "

Organizers：NISHIMURA Nobuya (Osaka City Univ.), SAITO Kiyoshi (Waseda Univ.)


E11 9:30〜10:30 OS2-1 [Chairperson：NISHIMURA Nobuya (Osaka City Univ.)]


E111 Energy-saving Merit by Introduction of a Heat Recovery Heat Pump to a Factory

　　　　*UMEZAWA Shuichi (Tokyo Electric Power Company), SHIMADA Hiroyuki, OKUDA Seiichi (Mitsubishi Heavy Industoris, LTD.), 　　　　SHIBUTANI Seiji

E112 Cycle Simulation of Hot Water Fired Absorption Chiller Using Multi-Stage Absorption

　　　　*ESAKI Shuji (Kagoshima Nat. College of Tech.), IRAMINA Kazuyasu (Panasonic Co.), KOBAYASHI Takahiro,
　　　　OHNOU Masayuki (SOGA Iron Works), KANEKO Toshiyuki, SOGA Takashi

E113 Simulation of double stage absorption heat transformer

　　　　#TANO Hideaki (Waseda Univ.), SAITO Kiyoshi, INOUE Naoyuki, FUKUSUMI Yukihiro (Ebara Refrigeration Equipment & Systems Co., Ltd)


E12 11:10〜12:30 OS2-2 [Chairperson：SAITO Kiyoshi (Waseda Univ.)]


E121 Characteristic Analysis of Solar Energy Assisted Absorption Air-conditioning System

　　　　*NISHIMURA Nobuya (Osaka City Univ.), ITEYA Tomoki (Takasago Thermal Engineering Co.), IYOTA

　　　　Hiroyuki (Osaka City Univ.), MATSUBARA Tametoshi (Osaka Gas Co.)

E122 The Performance of Heat Storage by Ammonia/Water Absorption Refrigeration Cycle with Solution Tanks

　　　　#HIRAYAMA Kaoru (Tokyo Univ. of Agriculture and Tech.), AKISAWA Atsushi, UEDA Yuki, ARAKI Kazumichi, TAKEI Toshitaka

E123 Dynamic behavior of Solution Transportation Absorption chiller with 50m pipe length

　　　　*WATANABE Fumi (Tokyo Univ. of Agriculture and Tech.), AKISAWA Atsushi, UEDA Yuki, ARAKI Kazumichi, TAKEI Toshitaka

E124 Consideration of theoretical COP in absorption type refrigerator

　　　　#OHNO Keisuke (Waseda Univ.), NISHIYAMA Noriyuki (Tokyo Gas Co. Ltd.), SAITO Kiyoshi (Waseda Univ.)


Organized Session OS3 " Adsorption Refrigerator/HP and Chemical Heat Pump "

Organizers： AKISAWA Atushi (Tokyo Univ. of Agriculture and Tech.), KOBAYASHI Noriyuki (Nagoya Univ.),

　　　　　　　HAMAMOTO Yoshinori (Kyushu Univ.), SHIMIZU Naoki (Mitsubishi Plastics, Inc.)


E13 14:00〜16:00 OS3-1 [Chairperson：HAMAMOTO Yoshinori (Kyushu Univ.)]


E131 Demonstrating operation of adsorption chiller, AdRef-Noa-L which is driven by low temperature
　　　 heat source blow 60degC

　　　　KOMATSU Fujio (Mayekawa MFG.), SAKURAMOTO Suguru

E132 Cycle Output Characteristic of Adsorption Heat Pump Utilizing Low Temperature Waste Heat

　　　　#AIDA Ryouji (Nagoya Univ), KOBAYASHI Noriyuki, ESAKI Takehiro, ITO Shun, YOSHIDA Hiroaki (Fujitsu lab.), ASO Noriyasu (Fujitsu)

E133 Development of 10kW-class adsorption chiller

　　　　*SHIMIZU Naoki (Mitsubishi Plastics, Inc.), SUZUKI Masahiro, KUBOKAWA Seiichi, KAKIUCHI Hiroyuki,

　　　　SAWAI Shingo (Union Industry Co.,Ltd.), YONEZAWA Yasuo, KOBAYASHI Noriyuki (Nagoya Univ.)

E134 Miniaturization technology for adsorption heat exchanger of adsorption chiller

　　　　*SHIMIZU Naoki (Mitsubishi Plastics, Inc.), SUZUKI Masahiro, KUBOKAWA Seiichi, OKAHARA Kenji,

　　　　KAKIUCHI Hiroyuki, SAWAI Shingo (Union Industry Co.,Ltd.), YONEZAWA Yasuo

E135 Fuel cell waste heat powered adsorption chiller

　　　　#OH Seung Taek (Kyushu Univ.)

E136 Performance analysis of cascade type adsorption and vapor compression hybrid cycle using
　　　　 activated carbon and ethanol pair

　　　　#UDDIN Md Kutub (Kyushu Univ.)


E14 16:20〜18:00 OS3-2 [Chairperson：MIYAZAKI Takahiko (Kyushu Univ.)]


E141 Performance analysis of regeneration process based on condensation heat for double-effect
　　　　 refrigeration system

　　　　#KOBORI Taiga (Tokyo Univ. of Agriculture and Tech.), UEDA Yuki, AKISAWA Atushi

E142 Measurement and prediction of thermal resistance of a coated adsorbent on heat transfer plate
　　　　−Comparison with a particle packed bed of adsorbent−

　　　　#OUCHI Takafumi (Kyushu Univ.), HAMAMOTO Yoshinori (Kyushu Univ.), MORI Hideo, ETOH Atsuroh

E143 Preparation of Composite Sorbent CaCl2 in Oxalic Acid Anodized Alumina Film for Water Vapor Sorption

　　　　#SUWA Yuji (Kanazawa Univ.), KOMORI Hiroaki, KUMITA Mikio

E144 Evaluation of output performance of Heat Upgrading Operation with Chemical Heatpump

　　　　#ESAKI Takehiro (Nagoya Univ.), KITO Tsuyoshi, KOBAYASHI Noriyuki

E145 Heat Release Performance at Forming Ammine Complex with SrCl2

　　　　*MASUDA Soichiro (Nagoya Univ.), KOBAYASHI Noriyuki, OKAMURA Tohru (DENSO Corp.), FUSE Takuya


ROOM F


Workshop　WS1 "Heat Pump for Industrial Use and Energy Saving Technology"

Moderator：NISHIMURA Nobuya (Osaka City Univ.), SAITO Kiyoshi (Waseda Univ.), WATANABE Choyu (CRIEPI)


F11 14:00〜15:20 WS1-1 Chairperson：NISHIMURA Nobuya (Osaka City Univ.)］


F111 International Trends in Industrial Heat Pump Technology

　　　　*WATANABE Chjoyu (Central Research Institute of Electric Power Industry)

F112 Case Studies of High Temperature Heat Pump to the Industrial Field From System Study to Operation

　　　　*KANDO Masanori (MAYEKAWA MFG. CO., LTD)

F113 Development of a Compact CO2 Heat Pump for Industrial Drying

　　　　*HASHIMOTO Katsumi (CRIEPI), SAIKAWA Michiyuki, MISUMI Shuichi (OMRON Corp.),

　　　　KUME Yoshitaka (DENSO Corp.)

F114 Development and Introduction of a Heat Pump for Washing Process

　　　　*SHIBA Yoshiro (Zeneral Heat Pump), TANIFUJI Kouji,

　　　　NAKAYAMA Hiroshi (Chubu Electric Power Co., Inc.), SAKURABA Ichiro


F12 16:00〜17:20 WS1-2 ［Chairperson：WATANABE Choyu (CRIEPI)］


F121 Energy conservation activities by using Air-to-Water Heat Pump Water Heater

　　　　*IBA Isao (Toshiba Carrier), KIKKAWA Kazuhiro, KATAYAMA Kaoru, HONGOU Ichiro, MIYAOKA Youichi

　　　　(Chubu Electric Power), HAYASHI Daisuke

F122 Development of High Temperature Water Circulation Type Heat Pump for Industries
　　　　　　- Air-to-Water Heat Pump with a Maximum Leaving Water Temperature of 90 ?C -

　　　　*TAKAYAMA Tsukasa (TOSHIBA CARRIER Co.), SUZUKI Hideaki, IBA Isao, HONGOU Ichiro,
　　　　SAKURABA Ichiro (CHUBU Electric Power Co.,Inc.), MIYAOKA Youichi, NAKAYAMA Hiroshi

F123 Development of High Efficiency Air-Sourced Hot Water Supplying Heat Pump

　　　　*OUE Takahiro (Kobe Steel LTD.), SHIMODAHIRA Nobukazu

F124 Study of application of HFO-1234ze(E) to hot water centrifugal heat pump Evaluation of Low GWP
　　　　 Refrigerant HFO-1234ze(E) in high temperature region

　　　　*MATSUKURA Noriyuki (Mitsubishi Heavy Industries, Ltd.), OKUDA Seiichi, NAGAI Tatsuru, UEDA Kenji



DAY 2　September 13, 2012, Thursday


ROOM A


A21 8:40〜10:00 OS5-3 [Chairperson： INOUENorihiro (Tokyo Univ. of Marine Sci. and Tech.)]


A211 Influences of Miscible Oil on Boiling Heat Transfer of Ammonia
　　　　−Experimental Study of Flow Boiling Heat Transfer in a Horizontal Smooth Tube−

　　　　*NISHIDA Kosaku (Mayekawa MFG. Co.,Ltd.), KATSUTA Masafumi (Waseda Univ.),
　　　　MUGABI Nelson (Mayekawa MFG. Co.,Ltd.), MORIBAYASHI Toshiki (Waseda Univ.)

A212 Boiling heat transfer and pressure drop of CO2-POE mixture

　　　　*SAITO Yasushi (Research Reactor Inst. Kyoto Univ.), Matthias KIND (Karlsruhe Inst. of Tech.)

A213 Development of Estimation Method for Flow Pattern of Flow Boiling inside a Horizontally
　　　　 Internally Spirally Grooved Tube

　　　　#FUKUNAGA Tetsuya (Nagasaki Univ.), MOMOKI Satoru, NARUMIYA Katsuyuki, SHIGECHI Toru

A214 Flow Boiling Heat Transfer of R32 and R1234ze(E) in Horizontal Micro-Fin Tubes

　　　　#MISHIMA Fumiya (Kyushu Univ.), BABA Daisuke, LIU Jin Fan, KONDOU Chieko, KOYAMA Shigeru


A22 10:20〜11:40 OS5-4 [Chairperson：SAITO Yasushi (Research Reactor Inst. Kyoto Univ.)]


A221 Heat transfer and pressure loss of in-tube condensation and evaporation of R1234ze(E)/R32

　　　　#SHAGAWA Kazuhiro (Saga Univ.), HOSSAIN Md. Anowar, MIYARA Akio

A222 Experimental Study on Flow Boiling of R1234ze(E) in a Multi-Port Tube

　　　　#JIGE Daisuke (Kyushu Univ.), KAWASHIMA Hiroyuki, KOYAMA Shigeru

A223 Experimental Study on Flow Boiling Heat Transfer of Low GWP Refrigerant
　　　　in Multiport Extruded Tubes　　 at Low Mass Flux Region

　　　　#TANAKA Chitose (The Univ. of Tokyo), DANG Chaobin, MATSUOKA Fumio, HIHARA Eiji

A224 Condensation Heat Transfer and Pressure Drop of R32+R152a Mixtures inside Horizontal Internally
　　　Helical-grooved Small-diameter Tubes

　　　　　#KURITA Kosei (Graduate school of Marine Sci. and Tech.),OGAWA Shun (Tokyo Univ. of Marine Sci. and Tech.),
　　　　　ICHINOSE Junya (National Fisheries Univ.), INOUE Norihiro (Graduate school of Marine Sci. and Tech.)


A23 13:40〜15:00 OS5-5 [Chairperson：KONDO Chieko (Kyushu Univ.)]


A231 Flow patterns of the vapor-liquid two-phase flow in small tubes

　　　　#ENOKI Koji (Kyushu Univ.), MORI Hideo, MIYATA Kazushi (Tohoku Univ.), HAMAMOTO Yoshinori (Kyushu Univ.)

A232 Investigation of heat transfer characteristics of singe-phase flow in a smooth multi-port microchannel tube

LI Minxia (Tianjin Univ.), DAI Baomin, *DANG Chaobin (The Univ. of Tokyo), MA Yitai(Tianjin Univ.)

A233 Pressure Drop and Heat Transfer inside the Coiled Flow Channel of Heat Exchanger Tubes for Hot-water Supply Systems

　　　　#IKU Shinitsu (Graduate School of Marine Sci. and Tech.), TAKATA Naoyuki (Tokyo Univ. of Marine Sci. and Tech.),
　　　　 YAMASHITA Kenji, INOUE Norihiro (Graduate School of Marine Sci. and Tech.)

A234 Comparison between homogeneous, separated and drift flux two phase flow models for adiabatic capillary
　　　tube flow in a transcritical CO2 heat pump

　　　　*ABO-ELFADL Saleh (Assuit Univ.), ASANO Hitoshi (Kobe Univ.)


ROOM B


B21 8:40〜10:00 OS8-5 [Chairperson：TSUJIGUCHI Takuya (Gunma Univ.)]


B211 Dehumidification Characteristics of a brock type desiccant unit of organic sorbent under various conditions

　　　　HORIBE Akihiko (Okayama Univ.), *INABA Wataru, HARUKI Naoto

B212 Practical use study of desiccant air-conditioning unit using desiccant block
　　　−Part3. Practical use examination of thin desiccant block ambient air conditioning unit−

　　　　#SUZUKI Shunsuke (Kubota Corp.), SHINOHARA Masaaki, UTSUNOMIYA Shuji,TOYA Saburo (AT Tokyo Corp.)

B213 Practical use study of desiccant air-conditioning unit using desiccant block
　　−Part4. Performance evaluation of thin desiccant block ambient air conditioning unit−

　　　　#UTSUNOMIYA Shuji (Kubota Corp.), SHINOHARA Masaaki, SUZUKI Shunsuke,TOYA Saburo (AT Tokyo Corp.)

B214 Dehumidification Performance of Desiccant Humidity Controlling System with Cross-flow
　　　 Heat Exchanger Type Adsorber

　　　　*KUBOTA Mitsuhiro (Nagoya Univ.), SHIBATA Shoko, HORIE Nayuta, MATSUDA Hitoki


B22 10:20〜12:00 OS8-6 [Chairperson：KUBOTA Mitsuhiro (Nagoya Univ.)]


B221 Performance Analysis of Fixed Bed Desiccant Dehumidifier and
　　　　Evaporative Cooling System by Coupled Simulation

　　　　*MIYAZAKI Takahiko (Kyushu Univ.), KOYAMA Shigeru

B222 Research on energy saving and high performance of the desiccant dehumidifier

　　　　*JIN Weili (SEIBU GIKEN CO., LTD.,), OKANO Hiroshi, SAKAI Asami

B223 Dehumidifying Behavior and Performance prediction of Adsorbent Desiccant Rotor for Dry Air Production

　　　　#AYAME Hisao (SHIN NIPPON AIR TECHNOLOGIES), NAGASAKA Shigeyuki, GODO Masazumi, KODAMA Akio (Kanazawa Univ.)

B224 The necessity for desiccant air-conditioning in CO2 recovery useing system in greenhouse cultivation
−Performance of desiccant air-conditioning called for in CO2 adsorption process−

　　　　*SUZUKI Masaya (AIST), TSUKIMURA Katsuhiro, INUKAI Keiichi, MAEDA Masaki,
　　　　 NISHIMOTO Toshi (Nara Prefecture Agricultural Experiment Station), NAKA Terufumi, HIROOKA Kenji, SANO Taro,
　　　　INAMOTO Katsuhiko (National Agricultural Research Center for Tohoku Region),YOSHIKAW masaaki (Osaka Gas Co. Ltd.),
　　　　KISHIMOTO Akira, KITAMURA Katsuhiro (Nikkei Research & Development Centaer)

B225 Feasible study of thermal energy storage system using adsorbent desiccant rotor

　　　　#YAMASHIRO Go (Kanazawa Univ.), KODAMA Akio, OSAKA Yugo, KUBOKAWA Seiichi (Mitsubishi Plastics)


B23 13:40〜15:00 GS2 "Buildings and Air-conditioning"


　　　[Chairperson：HANZAWA Hisashi (Hokkaido Int. of Tech.)]

B231 Central Air Conditioning System Utilized Dead Space in the House

　　　　*OGASAWARA Kazutaka (Hokkaido Electric Power Co., Inc.), ISHIKAWA Mitsuhiro

B232 Approach of Facility Renewal aiming at Zero Energy Building
　　　　　　−1st Report : Inspection of Dedicated Air Conditioning System−

　　　　*NISHIZAWA Makoto (Sanken Setsubi Kogyo Co.,Ltd.), TOMURO Yasuhiro, YUKI Ryosuke, KUWAHARA Ryoichi

B233 Approach of Facility Renewal aiming at Zero Energy Building
　　　−2nd Report : Inspection of Heating System by Solar Thermal Energy and Measurement of Energy Consumption−

　　　　*TOMURO Yasuhiro (Sanken Setsubi Kogyo Co.,Ltd.), YUKI Ryosuke, KUWAHARA Ryoichi, NISHIZAWA Makoto

B234 Numerical Study on a Horizontal Nonisothermal Jet with a Ceiling Wall

　　　　#MIYATA Yoshinori (Seikei Univ.), OGAWA Takanobu


ROOM C


Organized Session OS11 " Application of the Refrigerating and Air Conditioning Technology to Agriculture and Stock Raising"

Organizers：OHTAKE Hideo (Hokkaido Inst. of Tech.), KONISHI Yasuyuki (Hokkaido Indus. and Tech. Center)


C21 8:40〜10:00 OS11 ［Chairperson：OHTAKE Hideo (Hokkaido Inst. of Tech.)］


C211 Simultaneous dehumidification and heating for greenhouse by using an adsorbent desiccant rotor
　　　　operated with humidity swing.

　　　　#HATA Motoki (Kanazawa Univ.), KODAMA Akio, OSAKA Yugo

C212 Experimental investigation of the ground source heat pump system in the plant factory suitable
　　　　for snowy region

　　　　*AKAHIRA Akira (AITC)

C213 The use and research of air conditioner for greenhouse in Hokkaido

　　　　*UBUKATA Masao (Hokkaido Res. Org.)

C214 Energy saving of a heat exchanging system in the low depths of the ground
　　　　−Verification of the possibility of energy-svinng prodution in the agricultural stock raisingfield−

　　　　*IDE Kiyotaka (Sekisui Chemical Hokkaido Co.,LTD.), ABIKO Masakazu,SUGANO Shouhei,
　　　　TANAKA Ichiro (Obihiro Univ. of Agriculture and Veterinary Medecine),
　　　　OHTAKE Hideo (Hokkaido Inst. of Tech.), UBUKATA Masao (Hokkaido Res. Org.)


C22 10:20〜11:40 GS5 「Equipments」 ［Chairperson：YAMADA Masahiko (Hokkaido Univ.)］


C221 The Investigation of the Hybrid Hot Water and the Heating Unit
　　　　−3rd Report: The Hot Water Hybrid Performance Enhansment and the Heating Hybrid Development−

　　　　*YAMADA Takeshi (Rinnai Corp.), MURAMATSU Yasuhito, IMAI Seishi, TOKORO Toshihiro, SASAKI Hiroaki, NAKASHIMA Chuji

C222 Development of CO2 heat pump hot-water space heating system using cascade heat pump cycle

　　　　*OSAGAWA Yasushi (Sanden Corp.), HASEGAWA Hiromi (Central Research Inst. of Electric Power Industry),
　　　　HASHIMOTO Katsumi, FUJINAWA Takeshi, KAIDA Takenobu,ISHIKAWA Mitsuhiro (Hokkaido Electric Power Co.,INC),
　　　　HONMA Takashi, KAMIOKA Hideyasu (Sanden Corp.), ISHIDA Hiroshi, TAKAYAMA Yasunori

C223 Heat Transfer Enhancement Influence of Metal Hydride Sheet Loaded into the Metal Hydride Particle Bed

　　　　BAE Sang-chul (Waseda Univ.), KATSUTA Masafumi, HOMMA Ikuto, #LIN Kuan-ting

C224 Food product design due to a dynamic frozen of multifunctional water species
　　　　by using a forced cyclic temperature change operation (FCTCO).

　　　　*KONISHI Yasuyuki(HITEC), KIDOGUCHI Etsuko,MIURA Koichi (Kitami Inst. of Tech.), MATSUDA Hiroki,KOBAYASHI Masayoshi(ADTEC)


C23 13:40〜15:20 GS4 「Systems」［Chairperson：ISHIKAWA Mitsuhiro (Hokkaido Electric Power Co.,INC)］


C231 Experimental verification of a thermal pump type refrigerant circulation system

　　　　NAKAZAWA Junichi (Toyo Engineering works), #ABE Hitoshi, NINOMIYA Toru

C232 Study on the optimization of heat source system by changing the building thermal load

　　　　#KATO Tetsu (Tokyo Univ. of Marine Sci. and Tech.), KAMETANI Shigeki

C233 Study on the establishment of performance evaluation method using the remote monitoring data for
　　　　Gas driven Heat Pomp air conditioning system

　　　　#NISHIMURA Shun (Tokyo Univ. of Marine Sci. and Tech.), KAMETANI Sigeki

C234 Study on the improving of efficiency on the GHP air conditioners using external heat source

　　　　#ICHISE Hitoshi (Tokyo Univ. of Marine Sci. and Tech.), KAMETANI Shigeki

C235 Study of Hybrid Ejector-Vapor Compression Air-Conditioning System Using Solar Energy

　　　　DANG Chaobin (The Univ. of Tokyo), #SHIMIZU Akihiko, NAKAMURA Yoshitaka, HIHARA Eiji


ROOM D


D21 8:40〜10:00 OS4-4 ［Chairperson：FUKUTA Mistuhiro (Shizuoka Univ.)］


D211 Development of Lightweight and High Efficiency Swing Type Compressor using New Interior
　　　　 Permanent Magnet Synchronous Motor

　　　　*SEKIGUCHI Tempei (Daikin Industries, Ltd.), ADACHI Makoto, SHIMIZU Youhe, ISHIZAKI Akinobu

D212 Development of a New Mechanism for Dual Rotary Compressor

　　　　*HIRAYAMA Takuya (Toshiba Carrier), MONASRY Jafet, HIRANO Koji, KONEMURA Hitoshi, SHIDA Shogo

D213 Development of the rotary compressor which is high performance in the wide range
　　　　and has high refrigerating capacity

　　　　#IKEDA Akinori (Toshiba Carrier Co.,Ltd), SATODATE Koji, AOKI Toshimasa, MIURA Kazuhiko, SHIBATA Kazuo, WATANABE Norihisa

D214 Study of Improving Oil Separation of a CO2 Rotary Compressor by CFD Analysis inside the shell

　　　　#MOROE Shogo (Mitsubishi Electric), YOKOYAMA Tetsuhide, MAEYAMA Hideaki, SHINGU Keisuke,
　　　　SEKIYA Shin, TAKAHASHI Shinichi, NISHIMURA Nobuya (Oosaka City Univ.)


Organized Session OS9 "Low-GWP Refrigerants, Their Thermophysical Properties and Applications"

Organizers： AKASAKA Ryo (Kyushu Sangyo Univ.), KAYUKAWA Youhei (AIST)


D22　10:20〜11:40　OS9　　［Chairperson：KAYUKAWA Youhei (AIST)］


D221 A New Helmholtz Energy Equation of State for HFC-245fa

　　　　*AKASAKA Ryo (Kyushu Sangyo Univ.), ZHOU Yong(Xian Jiaotong Univ.) ,LEMMON Eric W.(NIST)

D222 Rapid evaluation of stability of refrigerant showing low GWP using dispersed metal specimens

　　　　*SUZUKI Takashi (Gunma Pref. Ind. Tech. Ctr.), KOMATSU Shunji (Waseda Univ.), BAE Sangchul, KATSUTA Masafumi

D223 Measurements of Vapor Pressures and PvT Properties for R-1234ze(Z)

　　　　*HIGASHI Yukihiro(Iwaki Meisei Univ.), OGIYA Shun (Graduate School of Iwaki Meisei Univ.)

D224 Measurement of Speed of Sound in Liquid Phase of HFO-1234yf

　　　　#SHIBASAKI Takuro(Fukuoka Univ), ASOU Hiroyuki, GAO Lei, HONDA Tomohiro


D23 13:40〜15:20 OS7-2 [Chairperson：KUMANO Hiroyuki (Aoyama Gakuin Univ.)]


D231 Melting of ice particle bed due to inflow of warm water
　　　　−Effect of initial shape of ice particle bed on melting behavior−

　　　　*ASAOKA Tatsunori (Aoyama Gakuin Univ.), OKADA Masashi, YAJIMA Tatsuya

D232 Heat Storage and Release Characteristics of Latent Heat Storage Paraffin with the Metal Fiber Materials


　　　　HARUKI Naoto (Okayama Univ.), HORIBE Akihiko, *SAWA Masahiro

D233 Newly developed measurement for bubbly flow via a Single-Tip Optical fiber Probe based
　　　　 on 3-D ray-tracing simulations

　　　　#MIZUSHIMA Yuki (Shizuoka Univ.), SAKAMOTO Akihiro, FURUICHI Hajime, SAITO Takayuki

D234 Investigation on formation of ice trapping ozone micro-bubbles

　　　　#FURUYA Koji (Chuo Univ.), MATSUMOTO Koji, TERAOKA Yoshikazu (Kanazawa Univ.), HAYASHI Keisuke (Chuo Univ.), MURAHASHI Keisuke

D235 Condensation Promotion of Super-Heated Steam Bubbles by Using Ice Slurry

　　　　#SATO Takayori(Hokkaido Univ.),YAMADA Masahiko


ROOM E


General Session GS3 "Simulation and Optimization"


E21 13:40〜15:20 GS3 [Chairperson：OBARA Shinya (Kitami Inst. of Tech.)］


E211 Design of decentralized energy system and simulation of renewable energy introduction
　　　　in Honjo Smart Energy Town

　　　　*NAKAMURA Takuya (Waseda Univ.), OGINO Daisuke, KUWAHARA Takeki, NAGATA Katsuya, ONODA Hiroshi, NAKAJIMA Takafumi (WEI)

E212 Study on energy conservation in the proposed commercial facilities

　　　　MINAMI Yuki (Waseda Univ.), #ENAI Yuki, ONODA Hiroshi (Waseda Univ. Environmental Research Inst.), NAGATA Katsuya (Waseda Univ.)

E213 Examination about construction of the operation system of the vending machine for drinks
　　　　−The actual proof of the power consumption reduction effect by replacement of the vending machine in Waseda University−

　　　　#KUWAHARA Takeki (Waseda Univ.), NAKAZIMA Takashi, ONODA Hiroshi (Waseda Univ. Environmental Research Inst.),
　　　　NAGATA Katsuya (Waseda Univ.)

E214 Optimization for operation schedule of electricity storage facilities and heat storage facilities 　　　installed in office buildings

　　　　#SAITO Masaaki (Toshiba Corp.), MURAYAMA Dai, MURAI Masahiko, TAKAGI Yasuo, IINO Yutaka,YAMAZAKI Kenichi

E215 Simulation and Measurement Analysis of Refrigerant Leaks in Supermarket

　　　　*TOMOCHIKA Kazuyoshi (Panasonic Corp.), NAKANO Kazuo(TOKYU Department Store CO,LTD.), SATO Norio (HAMA Engineering Corp.)


ROOM F


Workshop WS4 "Application of functional ice and ice slurry to the refrigeration of foods"

Moderators：MATSUMOTO Koji (Chuo Univ.), KUMANO Hiroyuki (Aoyama Gakuin Univ.)


F21 9:00〜10:00 WS4-1 [Chairperson：MATSUMOTO Koji (Chuo Univ.)］


F211 Application of Dynamic-type Ice Storage System to Food Cooling Process
　　　−Adoption for Chilled Water Feeder in Dairy Product Plant−

　　　　*MITO Daisuke (Takasago thermal engineering Co., Ltd.), MANO Tatsunori, HONGO Masaru, WAKASA Kazuo

F212 The application case of “Dynamic ice storage system” to “Chilled water supply” and “0?C air conditioning”

　　　　*YAMADA Ikuhiro (Shinryo Corp.)


F22 10:20〜11:50 WS4-2 [Chairperson：KUMANO Hiroyuki (Aoyama Gakuin Univ.)］


F221 Introduction of the use of slurry ice for the fishery, and its Perspective

　　　　*OKANO Toshiyuki (Fishing Boat and System Engineering Association of Japan),
　　　　UNO Mitsuyo (Nissin Refrigeration & Engineering LTD.),SHIRAI Masaki (Hitz Solution Group Slurry21 Corporation ),
　　　　TSURU Sentarou (Fisheries Research Agency)

F222 Introduction of a heat pump system for cow barn with dynamic type ice storage

　　　　HIRANO Shigeki (Hokkaido Res. Orgn.), HOSHINA Hideo,
　　　　YANAGIDA Kiyoshi (Yanagida Electric Co., Ltd.), KAWANAMI Tshuyoshi (Kobe Univ.)

F223 Realization of regional construction through practical use of Oya stone pit site

　　　　*SATO Daichi (Utsunomiya City Office)


Seminar SN1 "Seminar on Compressor Technology"

Moderator：TOJO Kenji (Hitachi Appliances), HIRAYAMA Takuya (Toshiba Carrier)


F23 13:40〜15:20 [Chairperson：TOJO Kenji (Hitachi Appliances), HIRAYAMA Takuya (Toshiba Carrier)]


F231 Report of the 10th IIR/IIF Gustav Lorentzen Conference on Natural Refrigerant

　　　　*HASHIMOTO Katsumi (CRIEPI)

F232 Report on 2012 Purdue Conferences

　　　　*MASUDA Masanori (DAIKIN Industries)

F233 Air-cooled Heat Pump Module Type Chilling Unit 『Universal Smart X』

　　　　*TANNO Hideki(Toshiba Carrier Corporation)

F234 Commercial use CO2 Heat Pump Water Heater with Scrotary compressor

　　　　KOBAYASHI Hiroyuki (Mitsubishi Heavy Industries Ltd.), *KOBAYASHI Takayuki, YOSHIDA Shigeru,
　　　　KIMATA Yoshiyuki, SATO Hajime

F235 History of Compressors Motor for Air Conditioner and Refrigerator

　　　　*NOTOHARA Yasuo (Hitachi Research Laboratory, Hitachi, Ltd.,)




Special Lecture (16:00〜17:30)　　　 MC: KAWAI Hiroaki (Hokkaido Institute of Technology)

SL01Mechanical interaction among cells for macroscopic structure of living bodies

　　　　* KAWABATA Kazushige (Faculty of Advanced Life Sciences, Hokkaido University)




DAY 3　September 14, 2012, Friday


ROOM A


A31 9:00〜10:20 OS5-6 [Chairperson：MIYARA Akio (Saga Univ.)]

A311 Study of the effect of refrigerant flow behavior on heat transfer performance of
　　　　a single channel plate-fin heat exchanger

　　　　*ASANO Hitoshi (Kobe Univ.), TOMINAGA Yuuki, SHIKICHI Kazuaki (KEPCO)

A312 CO2 Heat-Pump Compatible with Various Heat Sources −Experimental of Plate Type Evaporator−

　　　　KATSUTA Masahumi (Waseda Univ.), *KATO Takaaki, TANINAKA Katsutoshi

A313 Study on Characteristics of Refrigerant Flow in an Evaporator for a Refrigerator during Defrosting Process

　　　　#MIYAZAKI Yusuke (Kyushu Univ.), KARIYA Keishi, HORII Katsunori(Panasonic),
　　　　MORI Hideo (Kyushu Univ.), HAMANOTO Yoshinori

A314 A New Method for Measuring Refrigerating Capacity of Unit Coolers
　　　　−Improvement of measurement for the application to a freezing temperature condition−

　　　　#WANG Hao (Tokyo Univ. of Marine Sci. and Tech.),WATANABE Manabu, MANO Tatsunori (Takasago Thermal Engineering Co., Ltd.),
　　　　SUZUKI Toru (Tokyo Univ. of Marine Sci. and Tech.)


A32 10:40〜11:40 OS5-7 [Chairperson： WATANABE Manabu (Tokyo Univ. of Marine Sci. and Tech.)]


A321 Study on Heat Transfer and Pressure Drop of Air Flow between Concavo-Convex Plates

　　　　KATSUTA Masafumi (Waseda Univ.), KANEKO Akira, *HAMANO Yuki

A322 Application of field synergy principle on the heat transfer enhancement in heat exchanger design

　　　　*DANG Chaobin (The Univ. of Tokyo), HIHARA Eiji

A323 Heat transfer performance of a heat exchanger using airfoil-shaped tubes attaching fins
　　　　 to leading or trailing edge

　　　　*ONISHI Hajime (Kanazawa Univ.), YAMAMOTO Akihiro, TADA Yukio, TAKIMOTO Akira


ROOM B


Organized Session OS1 " Simulation Techniques for Refrigeration and Air-Conditioning Systems "

Organizers： SAITO Kiyoshi (Waseda Univ.), NONAKA Masayuki (Hitachi Appliances)


B31 9:00〜10:20 OS1-1 [Chairperson：SAITO Kiyoshi (Wasea Univ.)]


B311 Performance Analysis of a Multi-split Type Air-Conditioning System for Buildings by Numerical Simulation
　　　−Influence of Height Difference and Pipe Length on System Performance−

　　　　*WAKUI Tetsuya (Osaka Prefecture Univ.), YOKOYAMA Ryohei, NAKAGAWA Nobuhiro (Samsung Yokohama Research Inst.),
　　　　 KANEKO Takashi, MIYABA Yasuaki

B312 Estimation of Daily Performance Change of a CO2 Heat Pump Water Heating System
　　　　−Estimation in Winter Season−

　　　　YOKOYAMA Ryohei (Osaka Prefecture Univ.), #KATO Ryosuke, WAKUI Tetsuya, TAKEMURA Kazuhisa (Kansai Electric Power Co.)

B313 Numerical simulation of two-phase flow pattern of supercritical carbon dioxide
　　　　 with PAG-type lubricating oil in gas cooler

　　　　*DANG Chaobin (The Univ. of Tokyo), ANAI Shindaro, HIHARA Eiji

B314 Development of Propeller Fan Using CFD and Numerical Optimization

　　　　*YAMAKAWA Hironobu (Hitachi, Ltd.)


B32 10:40〜12:00 OS1-2 [Chairperson：NONAKA Masayuki (Hitachi Appliances)]


B321 Evaluation of multi indoor units' air-conditioners changing the number of active units
　　　　−Evaluation by simulation model−

　　　　*MATSUMOTO Kuniyasu (Kansai Electric Power Co.,Inc.), UENO Kiyotaka (Kansai Electric Power Co., Inc.),
　　　　SAITO Kiyoshi (Waseda Univ.), OHNO Keisuke

B322 Energy Reduction of Data Centers with High Density ICT Equipment using Low Volume of Cooling Airflow

　　　　*MATSUNAGA Arihiro (NEC), INABA Kenichi, YOSHIKAWA Minoru

B323 Study on Packaged Air Conditioners with refrigerant pump for Data Centers
　　　−Part1 : Modeling and validity examination of the Packaged Air Conditioners−

　　　　　#UDAGAWA Yosuke (NTT Facilities,INC.), SEKIGUCHI Keisuke, YANAGI Masahide,SAITO Kiyoshi (Waseda Univ.), OHNO Keisuke

B324 Study on Packaged Air Conditioners with refrigerant pump for Data Centers
　　　　−Part2 : Parameter study−

　　　　#OHNO Keisuke (Waseda Univ.), SAITO Kiyoshi, UDAGAWA Yosuke (NTT facilities),SEKIGUCHI Keisuuke, YANAGI Masahide


ROOM C


Organized Session OS12 "Performance Evaluation of Air-conditioners, Chillers and Heat Pump Water Heaters"

Organizers：SAITO Kiyoshi (Waseda Univ.), NISHIMURA Nobuya (Osaka City Univ.), WATANABE Choyu(CRIEPI)


C31 8:40〜10:20 OS12-1 [Chairperson：WATANABE Choyu (CRIEPI)]


C311 Research and Development of Innovative Energy-saving Controls of Next-generation
　　　　 Multi-Split type Air-conditioning Systems for Buildings
　　　　−1st report - Air-conditioning control with sequential estimation of heat load using heat load model of buildings−

　　　　*KASAHARA Shinichi (Daikin Industries, Ltd), KIBO Kousuke, OKA Masahiro,YABU Tomohiro,
　　　　 IWATA Yoshinari (Chubu Electric Power Co., Inc.), SAKURABA Ichirou, NAGAMATSU Katsuaki

C312 Research and Development of Innovative Energy-saving Controls of Next-generation
　　　　Multi-Split type Air-conditioning Systems for Buildings
　　　　−2nd report - Performance evaluation based on measurements in testing facility−

　　　　*NAGAMATSU Katsuaki (Chubu Electric Power Co.,Inc.), SAKURABA Ichirou, IWATA Yoshinari,
　　　　 HIROTA Masafumi(Mie Univ.), KASAHARA Shinichi (Daikin Industries,Ltd)

C313 Research and Development of Innovative Energy-saving Controls of Next-generation
　　　　Multi-Split type Air-conditioning Systems for Buildings
　　　　−3rd report - Verification of BEST Energy Simulation by Comparison with Real Energy Consumption measured in existing building−

　　　　*SHINAGAWA Koichi (Nihon Sekkei), KATSURAGI Hiromasa, HOSHINO Hideaki, IWATA Yoshinari (Chubu Electric Power Co., Inc.)

C314 Partial load performance of a VRF system under automatic control operation

　　　　*FUJIMOTO Isao (The Kansai Electric Power Co.,Inc.), TAKEMURA Kazuhisa, SAITO Kiyoshi (Waseda Univ.), OHNO Keisuke,
　　　　MURATA Hiromichi (P.T.Morimura & Associates,Ltd.), NAKAMURA Hokuto

C315 Performance Evaluation of Room Air Conditioning Systems using Simplified Compressor Curve Method

　　　　*TAKEMURA Kazuhisa (Kansai Electric Power Co.,Inc.), UENO Kiyotaka, SASAKI Tunehisa, SAITO Kiyoshi (Waseda Univ.), OHNO Keisuke


C32 10:40〜12:00 OS12-2 [Chairperson：SAITO Kiyoshi (Waseda Univ.)]


C321 Study on Evaluation of Annual Energy Consumption of Multi-split type EHP Air-conditioner for Buildings
　　　　−1st report: Evaluation of energy-saving performance based on partial load performance tests−

　　　　*MIYAOKA Yoichi (Chubu Electric Power), IWATA Yoshinari, HIROTA Masafumi (Mie University), MIZUTANI Shuhei

C322 Study on evaluation of annual energy consumption of multi-split type EHP air-conditioner for buildings
　　　−2nd report: Examination of new evaluation method of energy consumption−

　　　　*HIROTA Masafumi (Mie University), MIZUTANI Shuhei, MIYAOKA Yoichi (Chubu Electric Power), IWATA Yoshinari

C323 Annual Performance Evaluation of Room Air-conditioners
　　　−Experiment in Low Cooling Part Load−

　　　　*HATANO Yusuke (Osaka City Univ.), NISHIMURA Nobuya, IYOTA Hiroyuki

C324 Performance evaluation of multifunction CO2 refrigerant heat pump water heater
　　　−Evaluation method including hot water supply and floor heating−

　　　　#FUJINAWA Takeshi (CRIEPI), MAE Masayuki (Tokyo Univ.), HASHIMOTO Katsumi (CRIEPI)


ROOM D


Seminar SN2 "Seminar on refrigeration engineers"

Moderator： FUJIWARA Kiyoshi (Mitsubishi Electric Building Techno Service Co., Ltd.)


D31 9:00〜11:00 SN2 [Chairperson：FUJIWARA Kiyoshi (Mitsubishi Electric Building Techno Service Co., Ltd.)］


D311 Sprout Control for Chip Potatoes by Ethylene

　　　　#HIMOTO Jun-ichi (Rakuno Gakuen Univ.)

D312 The hybrid type agricultural storage system using the cold thermal energy of snow-and-ice

　　　　*NAKAMURA Kenichi (Tajiri Machine Manufacturing), ISHIKAWA Mitsuhiro (Hokkaido Electric Power), WATANABE Nobuhiro

D313 Instructions of Examples snow saving for food industries and so on in Hokkaido

　　　　*AMAIKE Takehiro (Hokkaido Bureau of Economy, Trade and Industry)


ROOM E


Organized Session OS6 "Desiccant / Humidity control / Open Cycle Air Conditioning"

Organizers：HAMADA Mamoru (Mitsubishi Electric), KAMADA Toshimitsu (DAIKIN Industries)


E31 9:00〜10:20 OS6-1 [Chairperson：HAMADA Mamoru (Mitsubishi Electric)］


E311 Effect of surface texture on flost layer growth on a cold flat plate under forced convenction

　　　　*YAMADA Yuta (Shizuoka Univ.), FUKIBA Katsuyoshi, SONOBE Nobuki, OHKUBO Hidetoshi (Tamagawa Univ.)

E312 Studies on frost characteristics on fin type cooling surface in forced convection condition

　　　　*YOSHIDA Kenji (Osaka Univ.), TANIGAWA Takuma, KATAOKA Isao

E313 Effects of surface properties on frosting phenomena

　　　　#INOUE Sho (Tamagawa Univ), SUZUKI Yuji, MATSUMOTO Kyosuke, OHKUBO Hidetoshi

E314 Research on behavior of water cluster having its size equivalent to the critical size
　　　　 for nucleation using Molecular Dynamics Method

　　　　*OKAWA Seiji (Tokyo Inst. of Tech.), SENDAI Shimpei (Fujitsu)


E32 10:40〜11:40 OS6-2 Chairperson：KAMADA Toshimitsu (DAIKIN Industries)］


E321 Study on Dewing Characteristics on Outer Wall of Household Refrigerators

　　　　*KAWAI Ryoji (Hitachi, Ltd.), OHIRA Akiyoshi, OKADOME Shinichiro, NAKAMURA Hirokazu (Hitachi Appliances, Inc.), ITAKURA Hiroshi

E322 Effects of cold surface temperature on the frost density

　　　　*TASHIRO Yusuke (Mitsubishi Electric), HAMADA Mamoru

E323 Quantitative Evaluation of Frosting Phenomena Using Neutron Radiography

　　　　#YOSHIMURA Tomoya (Kansai Univ.), MATSUMOTO Ryosuke, UMEKAWA Hisashi, AMI Takeyuki, SAITO Yasushi (KURRI)


ROOM F


Workshop WS3 "Refrigeration System in Next-Generation"

Moderators： MATSUOKA Fumio (The Univ. of Tokyo), SEKIYA Sachio (Hitachi Ltd.)


F31 9:30〜11:00 WS3-1 "New technology survey"
　　　　　　　　 [Chairperson：HIRAO Toyotaka (Mitsubishi Heavy Industry Ltd.), KITAZUME Michio (SANDEN Corp.)］


F311 [Keynote Lecture] Pipe Flow and Heat Transfer Characteristics of Cryogenic Slush for High-efficiency Hydrogen Energy System

　　　　*OHIRA Katsuhide (Tohoku Univ.)

F312 Water Adsorption in Mesoporous Silica

　　　　*DAIGUJI Hirofumi (The Univ. Tokyo), YANAGIHARA Hideki, YAMASHITA Kyohei,

　　　　 ENDO Akira (AIST)

F313 Development of Speech Recognition Air-conditioner

　　　　*SEKI Yusuke (Toshiba Home Appliances Corp.), KODAMA Taizo, KIKUCHI Yasuhisa

F314 Binary Refrigerant System That Using CO2 Refrigerant for Freezing Show Case

　　　　YAMAGUCHI Yukio (SANDEN Co.), SUDA Junichi, KIMURA Makoto, *OMOTE Kazuhiro


F32 11:20〜12:40 WS3-2 "New Cycle Control" ［Chairperson：MATSUOKA Fumio (The Univ. of Tokyo), SEKIYA Sachio (Hitachi Ltd.)］


F321 The Advanced Performance of Air-Cooled PAC for Computer Room adding External Cold Heat

　　　　*MAN’O Tatsunori (Takasago Thermal Engineering Co., Ltd.), OOYAMA Takamasa, AIZAWA Naoki, KOYAMA Shigeru (Kyushu Univ.)

F322 Study of Multi-scale Simulation for Gas-liquid Flow within Refrigerant Distributor

　　　　*ISHII Eiji (Hitachi), YOSHIMURA Kazuki

F323 Transition of Refrigerant and Refrigeration Oil for Air Conditioner and Mobile Air Conditioner

　　　　*SAITO Rei (Japan Sun Oil), TANAKA Shuichiro, TANABE Yota

F324 The global Manufacturing Structure for AC & Refrigeration Position of Oversea Factories
　　　　and Mother Factory in Japan

　　　　*HASEGAWA Isao (DAIKIN Industries)